|
|
|
Last Updated: Jan 21st, 2011 - 19:22:45 |
The 8000P is a classic two channel power amplifier, delivering over 100W per channel and a peak output of over 40 Amps.
Comfortably able to drive most loudspeaker loads, the 8000P is equally useful in Home Cinema configurations as it is in high performance stereo applications.
Rated output power 100 W per channel into rated load impedance (8 ohm), 150 W into 4 ohm
Typical output power 120 W per channel into rated load impedance (8 ohm), 180 W into 4 ohm
Input for full rated power 1.0 V rms
Input impedance 47 k ohm nominal
Gain 29.0 dB at 1 kHz
Signal to noise Greater than 95 dB (relative to 0 dBW)
Frequency response (-3 dB) 0.1 Hz - 75 kHz
Frequency response (±0.3dB) 20 Hz - 20 kHz
Total harmonic distortion + noise Less than 0.05%
Dimensions (WxHxD - mm) 445 x 74 x 337
Faceplate: SILVER
© Copyright Alternative Audio Stereo Specialties - http://www.alternativeaudio.com
Top of Page
|
|
|
